GPZ 7000 Control Box
You may also like…
GPZ 7000
Application | Gold Prospecting (Waterproof coil to 1m/3ft) |
Technology | ZVT |
Frequency/Transmission | Zero Voltage Transmission (ZVT) |
Coil (standard) | 14″ x 13″ Super‑D Configuration with skidplate (waterproof to 1 m/3 ft) |
Audio Output | 6.3 mm (¼”) non waterproof socket, Wi‑Stream wireless signal transmission |
Headphones Supplied | KOSS UR 30 100 ohm with 6.3 mm plug (¼-inch) (non waterproof) |
Visual Display | Full colour LCD (320 x 240 pixels) |
Backlight | Yes |
Product ID | 252529 |
USB Connectivity | USB interface for XChange 2 PC software |
Memory | Yes |
Depth Indication | – |
Detect Modes | Gold Mode (High Yield, General, Extra Deep) Ground Type (Normal, Difficult, Severe) |
Discrimination | All Metal |
Timings | – |
Audio tone | 1-100 |
Audio Type | – |
Ground Balance | Auto and Manual (Quick‑Trak trigger button) |
Ground Balance Type | Auto and Manual (Quick‑Trak trigger button) |
Trash Density | – |
Pinpoint | – |
Sensitivity Adjust | Level (1-20) |
Tune / Noise Cancel | Auto and Manual (256 channels) |
Threshold | Level (1-50) Pitch (1-100) |
Target Volume Adjust | Range (1-20) Limit (1-20) |
Battery | Li-Ion Rechargeable Pack (7.2V DC, 72Wh) |
Low battery alert | Yes |
Length | Collapsed: 1170 mm (46.1”) Laid flat, packed position: 1304 mm (51.3”) Extended: 1526 mm (60.1”) Laid flat, packed position: 1651 mm (65.0”) |
Weight | 3.32 kg (7.32 lb) (Including GPZ 14 coil, skidplate and 72Wh battery) |
GPZ 7000 Koss Headphones
Koss Headphones
Compatible with GPZ 7000, CTX 3030, Safari, E-TRAC and X-TERRA Series Detectors
GPZ 7000 Screen Interface Pod
GPZ 7000 Screen Interface Pod
GPZ 7000 WM 12 Wireless Audio Module
Allows you to listen to audio wirelessly for greater freedom of movement. More than one WM 12 can be connected to GPZ 7000 for group training or dual-mono immersive sound.
GPZ 7000 Screen Interface Rear Cover
GPZ 7000 Screen Interface Rear Cover with Screen Cable
GPZ 7000 Headphone Module
Koss Headphones
Compatible with GPZ 7000, CTX 3030, Safari, E-TRAC and X-TERRA Series Detectors
GPZ 7000 19″ COIL
The GPZ 19 Super-D coil has been designed by Minelab to maximise the performance of your GPZ 7000 and give a significant depth increase over the standard GPZ 14 coil.
Related Products
Gold Monster 1000 Car Charger
Gold Monster 1000 Car Charger
Coiltek Gold Extreme 10×9 inch Coil
The smallest size in the GOLD EXTREME series, this coil has high sensitivity to the small targets with good depth ability.
This coils is a great choice for overgrown, tight terrains and is light weight and easy to manoeuvre.
- Compatible with the Minelab SDC2300 detector
Size
242 x 138mm / 10×5″
Weight
545g / 19.2oz
Configuration
Mono loop (MONO) coil
Warranty
2 Years
Skid Plate
Attached
Gold Monster 1000 10″ x 6″ Skidplate
Gold Monster 1000 5″ Double-D GM 05 Coil
Coiltek Goldstalker DD 22″ Coil
This is the serious prospector’s coil of choice for maximum depth and coverage whether searching for treasure or gold.
It is known in the treasure hunting regions worldwide as the cache coil with many users finding ancient artefacts at great depths, some as deep as 7 feet when used with a GPX detector. In open terrain on gold fields its outstanding for path finding and deep nugget hunting. The Double-d (DD) configuration can utilise the Iron Discrimination function on GPX Detectors.
- Compatible with all Minelab SD/GP and GPX detectors.
- Not compatible GPX6000 detectors.
Size
559mm / 22″
Weight
1300g / 38.8oz
Configuration
Double-D (DD) coil
Warranty
2 Years
Skid Plate
Attached
Coiltek Goldhawk 10×5″ Mono Coil
Goldhawk 10×5″ Mono Coil